Faulty smoke detector reported in residential fire alarm, Kingston MA
Heads up: This post was detected from real-time dispatch audio. Information may be incomplete, and the situation may evolve. Always verify using official agency releases.
Fire & ArsonFire department responded to a residential fire alarm in Kingston. No hazardous conditions were found after testing. The cause was a faulty smoke detector on the first floor which the homeowner will replace. The fire units cleared the scene.
Audio|Heard on: Kingston Fire and EMS Dispatch
Listen to dispatch call
00:32
Transcript:
00:00
Fire alarm, engine one.
00:03
Fire alarm.
00:05
The house has been metered, zero readings throughout.
00:11
Faulty detector, first floor in the family room.
00:15
Home wanted to replace the detector.
00:17
Engine one's going to be clear, command is terminated.
00:23
Receive that's going to be zero readings, all the detector on the first floor in the family room, homeowner to replace, and one's going to be clear, commands terminated on League Street.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Kingston, MA
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
Not all dispatch calls become confirmed incidents. This reflects early radio traffic only. Treat with caution.
