Residential fire alarm triggered accidentally with no fire, Shirley MA
Heads up: This post was detected from real-time dispatch audio. Information may be incomplete, and the situation may evolve. Always verify using official agency releases.
A residential fire alarm at a home near Spaulding Road activated accidentally. The homeowner pressed the fire alarm button by mistake while cleaning the keypad. No fire was found.
Audio|Heard on: Harvard (town of) Fire/EMS
Listen to dispatch call
01:29
Transcript:
00:00
Show the file I'm on the air, just special fire department,
00:03
over 30, Spaulding Road.
00:05
So the residential fire alarm active, called in by the alarm company.
00:09
No bell was given,
00:11
but the fire button was pressed on the keypad.
00:14
Thank you. They follow him on the air, the special fire department, to 30, Spaulding Road.
00:21
Aging 1-01-168.
00:23
No cell was given, but the fire button was pressed on the keypad.
00:26
Time of tone, 849.
00:32
All right, wherever the question is one responding 851.
00:44
Fire, C2[1] is responding.
00:47
C2[1] responding.
00:52
C2[1] responding, 850.
01:02
Friday-1-2-7-1-2-10-1-2-7-7-0-7-0-7-0-7-0-1-2-7-0-1 company callback stated
01:23
no fire the homeowner pressed the button on accident while cleaning the keypads but no issues at this time
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
C2: Car 2/Command 2 unit identifier (chief/officer unit)
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Spaulding Rd, Shirley, MA 01464
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
Not all dispatch calls become confirmed incidents. This reflects early radio traffic only. Treat with caution.